Surveillance Guide

UniFi Protect Cost for a Business Camera System

What a 4, 20 and 60 camera UniFi setup costs, and what the zero dollar software license leaves out.

UniFi Protect has no license fee and no required subscription, so your cost is hardware: cameras, a recorder, drives, a PoE switch and cabling. A 20-camera business system built on mid-range 4K cameras lands near $8,100 before drives and installation, and the real recurring cost is the staff time spent reviewing footage.

The Short Answer

What UniFi Protect Actually Costs

Ubiquiti gives the Protect software away. You do not buy device licenses the way you do with Milestone, and you do not pay a monthly fee per camera the way you do with Verkada or Rhombus. That is a genuine advantage and the reason UniFi is so common in small offices, restaurants and clinics. It is also why the question "how much does UniFi Protect cost" has a different answer from every other platform on this site: the answer is the price of the boxes.

Three things sit on that bill. Cameras, which run from roughly $100 for an entry bullet to around $380 for a 4K G5 Pro and $500 for an AI Pro class model, based on recent US list prices and reseller listings. A recorder, such as the UNVR Pro, which the Ubiquiti store lists at $499 for a 2U unit with seven drive bays. And everything around them: hard drives, a PoE switch, cable runs and someone to mount it all. Ubiquiti changes prices and stock often, so confirm the current figure on the store before you budget.

Worked Example

Three Business Sizes, Priced Out

Planning numbers built from recent list prices. Drives, switches, cable and labor are shown as ranges because they vary by site.

Item4 cameras (shop)20 cameras (office or clinic)60 cameras (campus or warehouse)
Cameras4 at about $130 = $52020 at about $379 = $7,58060 at about $379 = $22,740
RecorderCloud Key or small UNVR, about $200 to $300UNVR Pro, $4992 or 3 UNVR Pro units, about $1,000 to $1,500
Hard drives$100 to $250$400 to $900$1,500 to $3,000
PoE switch and cable$200 to $500$800 to $2,000$3,000 to $8,000
Installation$0 to $800$2,000 to $6,000$8,000 to $20,000
Software license$0$0$0
Rough total$1,000 to $2,400$11,300 to $17,000$36,000 to $55,000

The camera and recorder rows use the list prices above. The drive, switch, cable and installation rows are our planning ranges, not quotes, so treat the totals as an order of magnitude. The point of the table is the software row: it is zero, and hardware plus labor is the whole bill. Compare that to a licensed platform in our video surveillance pricing by vendor breakdown.

What Is Not in the Price

The Costs UniFi Leaves Out of the Quote

The quote is honest about hardware and silent about time. A single UniFi site is easy to run. The cost shows up when the footage has to be used.

Multi-site review. Each location runs its own recorder. There is no search that spans all sites, no shared alert rules and no one timeline. A manager with six locations opens six consoles, and an incident at 2:40 pm means checking each in turn. At two or three sites that is tolerable. Past that, someone is spending hours a week on it.

Detection depth. AI Pro class cameras do person and vehicle smart detections on the camera. Searching all footage for "man in a red jacket near the dock" or alerting on loitering, after-hours entry or line length is outside what Protect does on its own.

Off-site risk. A recorder in the back office is the first thing a thief or a flood takes with the footage on it. Off-site copies and remote access are optional extras you configure and maintain.

Mixed fleets. Most businesses that grow add a site with another vendor's cameras. Protect works with Ubiquiti cameras and a limited set of third-party ones, so a mixed estate usually ends up with two systems.

The Other Option

UniFi Alone Versus UniFi With an AI Layer

Adding a cloud analytics platform to the cameras you already own does not replace Protect. It changes what you can ask of the footage.

UniFi Protect aloneUniFi cameras plus Surveillant
Software cost$0$49 to $75 per camera per month
20 cameras per month$0$980 to $1,500
Search across sitesNo, one console per siteYes, one search box for every camera
AlertsSmart detections on supported camerasPeople, vehicles, loitering, after-hours and weapons alerts
Mixed camera brandsLimitedAny ONVIF or RTSP camera
Best forOne or two sites, cost firstSeveral sites, review time is the real cost

If you run one or two sites and nobody searches footage regularly, UniFi alone is cheaper and you should keep it. The paid layer earns its fee when someone spends real hours reviewing video, or when you need the same alert rules across every location. Our UniFi Protect alternative page walks through who should switch and who should not, and the best video management software guide compares the rest of the field.

Break-Even

When Does the Paid Layer Pay for Itself

Use your own numbers. Say a facilities manager earns $35 an hour and spends four hours a week pulling clips across six sites. That is about $7,300 a year of review time. Putting six cameras per site, 36 in total, on a per-camera plan at $49 comes to $21,168 a year, so the platform does not break even on review time alone at that scale. At 10 hours a week of review the same manager costs about $18,200, closer but still behind. The honest read is that analytics pays when it also removes a guard shift, shortens an insurance dispute or prevents a loss, not just when it saves clicks.

That is why we publish prices instead of hiding them. Run the arithmetic for your own sites on the pricing page, and compare vendor models in our Verkada pricing and Rhombus pricing guides. For a third-party view of what small business video systems cost to install, the US Small Business Administration has general guidance on securing your business.

Questions

UniFi Protect Cost, Answered

Is UniFi Protect free?

The UniFi Protect software is free. There is no per-camera license and no required subscription, so you pay for hardware only: cameras, a recorder such as a UNVR or a Cloud Key, drives, a PoE switch and cabling. The software cost is zero, but the system is not, and the hardware is where the money goes.

Does UniFi Protect require a subscription?

No. Recording to your own recorder needs no subscription. Ubiquiti sells optional remote and cloud features separately, and a platform like Surveillant is a different, paid layer on top. What you get without paying anything recurring is local recording, the Protect app and smart detections on supported cameras.

How much does a UniFi Protect system cost for a small business?

A 20-camera system built from G5 Pro class cameras at about 379 dollars each, plus a UNVR Pro at 499 dollars, lands near 8,100 dollars before drives, a PoE switch, cabling and installation. Entry cameras cost far less, and a 4-camera shop can come in under 1,500 dollars.

Can UniFi Protect manage multiple locations?

Yes, but each site runs its own recorder, and you reach them through the UniFi account and console list. There is no unified search across locations, no shared alert rules and no single timeline. For two or three sites that is fine. At ten sites it becomes the main operating cost.

When is a paid platform worth adding to UniFi cameras?

When the cost is time rather than hardware: checking footage at several sites, searching by description, or getting alerts for loitering and after-hours entry. If one person spends hours a week on camera review, a per-camera platform at 49 to 75 dollars a month is cheaper than that labor.

Keep your UniFi cameras and add search and alerts across every site

Connect two cameras, test the alerts, and decide with real footage.