Surveillance Guide
Replace Hikvision Cameras Cost for a Business Camera System
A 24 camera worked example, replacing the hardware against keeping it and adding software.
Replacing 24 Hikvision cameras with a different brand typically costs somewhere between $11,000 and $21,000 once cameras, labor and a recorder are counted, and it still leaves you without AI alerts or multi-site search. Keeping the cameras and adding a cloud analytics layer costs about $900 to $1,800 a month, with nothing to rip out. Which one wins depends on camera age, your compliance exposure and how many sites you run.
Why businesses are pricing a Hikvision replacement
Hikvision equipment appears on the FCC covered list, which stops new models from being authorized for sale in the US, and NDAA Section 889 bars federal agencies and their contractors from using it. If you hold federal contracts or grants, the rules apply to you directly. For everyone else the pressure is softer but real: insurers, landlords, school districts and large customers increasingly ask. Our page on NDAA compliant cameras covers who is affected, and the FCC publishes the covered list itself.
The expensive mistake is treating this as a camera question when it is a project with three separate costs: the cameras, the people who mount and aim them, and the recorder and software that make footage useful. The sections below price each one.
Option A, replace all 24 cameras
These are planning assumptions, not quotes. Camera prices are typical US street ranges for business-grade, NDAA compliant models. Labor depends heavily on ceiling height, cable runs and local rates, so get an installer to confirm.
| Item | Low assumption | High assumption |
|---|---|---|
| 24 cameras at $300 to $600 | $7,200 | $14,400 |
| Install labor at $100 to $150 per camera | $2,400 | $3,600 |
| Recorder, drives and switch changes | $1,500 | $3,000 |
| One-time total | $11,100 | $21,000 |
That number buys new cameras that record. It does not buy people detection that tells you who is in the yard, search that finds a white van across three sites, or off-site copies of the evidence. Those are software, and you would still be shopping for them afterwards.
Option B, keep the cameras and add a cloud AI layer
Surveillant connects to cameras over ONVIF or RTSP, so most working Hikvision units can stay. Twenty-four cameras means the Elite plan for twenty at $1,499 a month plus two Plus plans for two cameras each at $149, which is $1,797 a month, or roughly $900 a month billed yearly. Year one is about $10,800 on annual billing, and nothing is ripped out.
This path does not solve a hard compliance requirement. If a contract says Hikvision hardware cannot be on the premises, software will not help and Option A is the only answer. If the concern is risk and reputation, a common staged plan is to replace the cameras that face the street or the network edge first, and let interior units age out while the software layer covers all of them.
Our page on a Hik-Connect alternative shows how the connection works, and the Hikvision alternative page covers moving to a different manufacturer.
Which path wins
- Federal contract or grant: replace. Compliance is not optional and software does not change it.
- Cameras older than about eight years: replace the worst ones. Image quality and failed units make the case before any ban does.
- Several sites, mixed brands, no one watching video: software first. The missing piece is detection and search, not pixels.
- One site, five cameras, nobody asks: do nothing yet and budget a gradual swap.
If you want to compare what AI add-ons cost across vendors before deciding, read our video surveillance pricing by vendor breakdown. Installers and integrators who pitch these projects to clients often find prospects through outbound calling, and tools like Coldcalls can qualify those leads before a site visit.
A staged swap over three years
Most businesses that do replace do not do it in one purchase. Using the same 24 cameras, a staged plan could look like this. In year one, the eight exterior and entrance cameras are replaced at the mid assumption of $450 each plus $125 labor, about $4,600, while the software layer covers all 24 from day one. In year two, eight more are swapped, chosen by age or failure. In year three, the last eight go. The cash outlay on hardware is spread across three budgets, and the alerts and search work from the first week regardless of which brand is on the wall.
The tradeoff is that you run mixed brands for a while. That is fine for a software layer that reads ONVIF or RTSP, and it is awkward for a recorder tied to one brand, which is one more reason to keep recording flexible. Our guide to adding AI to existing security cameras walks through the connection steps.
What to ask an installer before you sign
- Is every model on the quote NDAA compliant, and can they put that in writing for each part number?
- Can they reuse your existing cabling and PoE switches, or does the quote assume new runs?
- Do the new cameras support ONVIF Profile S or T, so you are not locked to the recorder brand again?
- Who handles firmware updates and password changes after install, and is that in the price?
- What happens to your existing recordings during the swap, and where are they kept?
Those five answers move the quote more than the camera model does. A bid that reuses cabling can come in at the low end of the table above, and one that rewires every run can pass the high end.
Frequently asked questions
How much does it cost to replace Hikvision cameras?
For 24 cameras, plan on roughly $11,000 to $21,000 for cameras, labor and a recorder, or about $460 to $875 per camera. Ceiling height, cabling and the camera tier you choose move the number most.
Can I keep Hikvision cameras and add AI analytics?
Yes, if they expose RTSP or support ONVIF. Analytics software reads the stream, so the camera brand matters little. This does not satisfy a rule that bans the hardware itself.
Is it illegal for a business to use Hikvision cameras?
Not in general. NDAA Section 889 restricts federal agencies and their contractors and grantees, and the FCC covered list blocks new equipment authorizations. Private businesses without federal funding are not barred, but should check contracts.
Do I need to replace the recorder too?
If you change camera brands, usually yes, since recorders work best with their own brand. With a software layer on existing cameras, the recorder can keep working as a local backup.